PM STRUCTURAL
Evans and Cotton Wedges
Company Name
AMES Group Sintering, S.A.
Component Specification
Material Standard: CPTi (Commercial Pure Titanium)
Weight (kg): 0.006
Final Density (g/cm3): 1.6
Tensile Strength (MPa): 35
Yield Strength (MPa): 25
Component information
Main Forming Process: PM Structural (including Hard Materials and Diamond Tools parts)
Material: Titanium
End Use Sector: Medical
Length (mm): 20
Width (mm): 20
Height (mm): 10
Relevant Information: OsteoSinter® EVANS and COTTON wedges are porous titanium implants used to correct flatfoot deformities.
The product is produced by Press&Sinter technology by single-level uniaxial compacting and high vacuum sintering at > 1,350ºC.
Finishing Process: Implants are cleaned in ISO-8 room with water-based cleaning agents, then packed in ISO-7 room with double barrier, an finally sterilized with gamma ray.
Chemical Composition: Biocompatible CP pure Titanium